Company Details

  • UniSite Group

  •  [Zhejiang,China]
  • Business Type:Manufacturer , Trade Company
  • Main Mark: Americas , Asia , East Europe , Europe , Middle East , North Europe , Oceania , West Europe , Worldwide
  • Exporter:81% - 90%
  • Certs:ISO9001
  • Description:Investment Casting Parts,Oem Investment Casting Parts,Investment Casting Small Parts,Investment Casting Large Parts
Inquiry Basket ( 0 )
Home > Products > Casting Parts > Investment Casting Parts

Investment Casting Parts

Product categories of Investment Casting Parts, we are specialized manufacturers from China, Investment Casting Parts, Oem Investment Casting Parts suppliers/factory, wholesale high-quality products of Investment Casting Small Parts R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
View : List Grid
Investment Casting Steel Hinge Part

Model No. : USM-289

Investment casting is a manufacturing process in which a wax pattern is coated with a refractory ceramic material. Once the ceramic material is hardened its internal geometry takes the shape of the casting. The wax is melted out and molten metal is...

Expert Manufacturer of Investment Casting Parts
 Click for details
Investment Casting Iron Gearbox

Model No. : USM-287

Gearbox is one of the most important mechanical parts used in wind turbine. The main function is to transfer the power generated by the wind turbine to the generator and to get the corresponding speed. Generally, the speed of the wind wheel is very...

China Manufacturer of Oem Investment Casting Parts
 Click for details
Painted Steel Investment Casting Parts

Model No. : USM-275

Cast steel is a cast iron alloy, it is the general term of the iron base alloy that is used to produce castings in the solidification process without eutectic transformation. Cast steel can be divided into cast carbon steel, cast low alloy steel and...

High Quality Investment Casting Small Parts China Supplier
 Click for details
Bronze investment casting parts

Model No. : USM-107

Burnout preheating: The mold is then subjected to a burnout, which heats the mold to between 870 °C and 1095 °C to remove any moisture and residual wax, and to sinter the mold. Sometimes this heating is also used to preheat the mould before pouring,...

Professional Manufacturer of Investment Casting Large Parts
 Click for details
OEM stainless steel investment casting component

Model No. : USM-106

Dewax: Once ceramic moulds have fully cured, they are turned upside-down and placed in a furnace or autoclave to melt out and/or vaporize the wax. Most shell failures occur at this point because the waxes used have a thermal expansion coefficient...

Expert Manufacturer of Investment Casting Parts
 Click for details
Investment casting steel custom components

Model No. : USM-100

Apply investment materials: The ceramic mould, known as the investment, is produced by repeating a series of steps-coating, stuccoing, and hardening-until a desired thickness is achieved. Coating involves dipping a pattern cluster into a slurry of...

Oem Investment Casting Parts Export
 Click for details
Custom Investment casting products

Model No. : USM-094

The process can be used for both small castings of a few ounces and large castings weighing several hundred pounds. It can be more expensive than die casting or sand casting, but per-unit costs decrease with large volumes. Investment casting can...

Competitive Investment Casting Small Parts China Supplier
 Click for details
Brass investment casting parts

Model No. : USM-103

The steps are repeated until the investment reaches its required thickness-usually 5 to 15 mm (0.2 to 0.6 in). Investment moulds are left to dry completely, which can take 16 to 48 hours. Drying can be accelerated by applying a vacuum or minimizing...

High Quality Investment Casting Large Parts China Factory
 Click for details
High precision investment cast aluminum part

Model No. : USM-097

Create a mould: A mould, known as the master die, is made to fit the master pattern. If the master pattern was made from steel, the master die can be cast directly from the pattern using metal with a lower melting point. Rubber moulds can also be...

China Supplier of Investment Casting Parts
 Click for details
Stainless steel investment casting parts

Model No. : USM-105

Prior to silica, a mixture of plaster and ground up old molds (chamotte) was used.[8] The binders used to hold the refractory material in place include: ethyl silicate (alcohol-based and chemically set), colloidal silica (water-based, also known as...

China Factory of Oem Investment Casting Parts
 Click for details
Steel investment casting precision components

Model No. : USM-102

The steps are repeated until the investment reaches its required thickness-usually 5 to 15 mm (0.2 to 0.6 in). Investment moulds are left to dry completely, which can take 16 to 48 hours. Drying can be accelerated by applying a vacuum or minimizing...

 Click for details
High precision investment bronze part

Model No. : USM-108

Pouring: The investment mold is then placed open-side up into a tub filled with sand. The metal may be gravity poured or forced by applying positive air pressure or other forces. Vacuum casting, tilt casting, pressure assisted pouring and...

 Click for details
High precision investment cast brass part

Model No. : USM-104

Silica is usually used in the fused silica form, but sometimes quartz is used because it is less expensive. Aluminium silicates are a mixture of alumina and silica, where commonly used mixtures have an alumina content from 42 to 72%; at 72% alumina...

 Click for details
Steel investment casting parts

Model No. : USM-101

If a core is required, there are two options: soluble wax or ceramic. Soluble wax cores are designed to melt out of the investment coating with the rest of the wax pattern; ceramic cores are removed after the product has hardened. The fragile wax...

 Click for details
Investment casting steel parts

Model No. : USM-099

Assemble wax patterns: Multiple wax patterns can be created and assembled into one large pattern to be cast in one batch pour. In this situation, patterns are attached to a wax sprue to create a pattern cluster, or tree. To attach patterns, a...

 Click for details
Precision investment casting equipment part

Model No. : USM-098

Produce wax patterns: Although called wax patterns, pattern materials may also include plastic and frozen mercury.[4] Wax patterns can be produced in one of two ways. In one process, the wax is poured into the mold and swished around until an even...

 Click for details
Investment die casting components

Model No. : USM-095

Process of investments castings Castings can be made from an original wax model (the direct method) or from wax replicas of an original pattern that need not be made from wax (the indirect method). The following steps describe the indirect process,...

 Click for details
OEM aluminum investment casting component

Model No. : USM-093

Investment casting derives its name from the pattern being invested (surrounded) with a refractory material. Many materials are suitable for investment casting; examples are stainless steel alloys, brass, aluminium, carbon steel and glass. The...

 Click for details
Aluminum investment casting auto part

Model No. : USM-092

Investment casting has been used in various forms for the last 5,000 years. In its earliest forms, beeswax was used to form patterns necessary for the casting process. Today, more advanced waxes, refractory materials and specialist alloys are...

 Click for details
China Investment Casting Parts Suppliers

The steps are repeated until the investment reaches its required thickness-usually 5 to 15 mm (0.2 to 0.6 in). Investment moulds are left to dry completely, which can take 16 to 48 hours. Drying can be accelerated by applying a vacuum or minimizing environmental humidity. Investment moulds can also be created by placing the pattern clusters into a flask and then pouring liquid investment material from above. The flask is then vibrated to allow entrapped air to escape and help the investment material fill any small voids. Common refractory materials used to create the investments are: silica, zircon, various aluminium silicates, and alumina.Burnout preheating: The mold is then subjected to a burnout, which heats the mold to between 870 °C and 1095 °C to remove any moisture and residual wax, and to sinter the mold. Sometimes this heating is also used to preheat the mould before pouring, but other times the mould is allowed to cool so that it can be tested. Preheating allows the metal to stay liquid longer so that it can better fill all mould details and increase dimensional accuracy. If the mold is left to cool, any cracks found can be repaired with ceramic slurry or special cements


Main particulars

MAIN PARTICULARS

Tolerance

High accuracy(ISO2768, ISO5817, ISO13920, DIN1690)

Material

GS30Mn5,Aluminium, Iron and other material

Dimension(L*B*H)

As per drawing, as large as we can

Weight

1KG~15Ton

Coating

Sa2.5 blasted and two or three layers painted with highest quality

Machined surface with tectyl891

Marking

as per clients' requirements

Inspection

material, construction, dimension, non defective test, paint inspection

Experience

We have made the pump cover(welded+casted+machined) with big diameter OD3500MM

Others

Recyclable, in line with environmental requirements and standards, and reliable

The photos of our Investment Casting Parts


3Investment Casting Parts



Communicate with Supplier?Supplier
Kevin Mei Mr. Kevin Mei
What can I do for you?
Chat Now Contact Supplier